AC220V, AC110V, AC24V 3piece 1" motor electric valve for Small equipment for automatic control

AC220V, AC110V, AC24V 3piece 1" motor electric valve for Small equipment for automatic control

Characteristic and performance:

New alloy material shell
Metal gear, large output torque
Active  and  Passive signals output
Voltage : AC 220V / 50Hz,AC12/24V
With manual function, with open/clsoe indicator.
Power : 14W
Working current: 300mA
Ourput torque : 40NM
Working pressure : 0 1.6Mpa
Temperature : 0 60 degree celsius
Open/close time: 10-15 secons
Wires: 4-6wires
Protection : IP67
Valve body : ball valve DN15-DN40    butterfly valve DN40-DN80
Valve material : UPVC, cast steel, cast iron, stainless steel

Feature

Series CTF actuators with its smart design, wonderful shape, are suitable for many kinds of vavles. It has proved its superior quality for its stable nature, and good quality. These actuators are return type and suitable to DC or AC (will be set in the factory), can be controlled by outside cut off.  This actuator run low cost and does not need to be maintained.

 DC or AC (should be set in the factory), control mode is flexible, convenient to microprocessor and realize the automatic control by PLC.
 Manual/electrically operated integrated design, Simply to operate.
 Large output torque, inner protecting overheated device, working stable and reliable.
 Low noise, good leak-proof. Through the coupling, the valve will be installed and operated    easily.

Basic Information:

Trade & Market:

Factory Information:

Features:
1. Smart shape,perform reliably,brass gear,PPO parts,large output torque,long product life for 100,000 times.
2. Electrical limit and machinery limit design,accurate position,avoid gear with switch.
3. Multi-angle assembling,easy to install.
4. Float ball structure,no leakage,especially suitable for heavy pollution conditions.
5.Good substitution for solenoid or pneumatic valve.
6. High protection class,can be worked in moist conditions. IP65.

Material of main parts:
Actuator: heat-resistant ABS
Sealing: PTFE, silicon rubber ball seat, EPDM and NBR stem seat, NBR o-rings
Body: brass or stainless steel
Ball: brass or stainless steel
Stem: brass or stainless steel

Situable for :
1.IC card meters,heat energy meters
2.Air-warm valve.HVAC and fire works.
3.Water equipment,auto-control watersystem,industrial mini-auto equipment, Small equipment for automatic control
4.Irrigation equipment,drinking water equipment,solar water heaters,washing machines,water heaters,industrial humidifier.
6.Solar thermal,under-floor,rain water,irrigation,plumbing service,hot water heating and solar glycol loop,ideal for off-grid system.
Domestic/potable water,Irrigation system,cooling/heating system,Low voltage plumbing system
7.Multiple voltage and control mode, applicable to a variety of occasions.

Suitable for