Brand Name: MOJO
Model Number: MJ-HZ43WA
Place of Origin: Guangdong, China (Mainland)
Product show
Product description and advantage:
Environmental protection design,
food grade PBT material
small, practical
can be arbitrary Angle adjustment
Product Image:
The principle of operation
Water flow sensor is the use of the Hall element to measure the Hall effect magnetic sensors of physical quantities. Water flow sensor mainly consists of copper body, water the rotor assembly, steady flow component and Hall sensors, installed in the water heater inlet side used to detect the size and water flow off.
Applications
Mainly used for water heater, boiler, water dispensers, coffee machines, hot card machines, steam equipment, water system, the campus card sales, selling self-help water systems, water treatment equipment, cooling systems, mechanical equipment, instrumentation, pharmaceutical equipment.
Electrical parameters
NO |
Item |
Examination requirement |
1 |
Appearance |
Clean and beautiful, smooth without burr, without off color |
2 |
Water pressure resistance performance |
1.75 MPa pressure has no slack phenomenon, and parts no crack, relaxation, inflation, and deformation anomaly |
3 |
Operating voltage range |
DC3-18V |
4 |
Maximum operating current |
15mA |
5 |
The output pulse high level |
In 5 V rated voltage, the output of the high level requirements in 4.5 V above |
6 |
The output pulse low level |
In 5 V rated voltage, the output of the low level requirements in 0.5 V the following |
7 |
The output pulse duty ratio |
In the rated voltage, the output pulse occupies emptiescompared to 50%-10% |
8 |
Flow pulse characteristics |
[4.1Q]±10% |
9 |
Insulating property |
Dielectric resistance:>100MΩ |
10 |
Electrical strength |
AC500V 50Hz(Don't breakdown or flash winding) |
11 |
Electrical strength(100°C) |
In 100 °C temperature placed in 72 hours, in the environmental temperature back after 1 hour the accuracy of measurement requirements within the plus or minus 5% |
12 |
Cold resistance(-20°C) |
In 20 °C temperature placed in-72 hours, in the environmental temperature back after 1 hour the accuracy of measurement requirements within the plus or minus 5% |
13 |
Mode of connection |
Red: the positive, black: negative, yellow: pulse signal |
Routine maintenance
Periodically clear the guide rod and float on the dirt (as the media cycle may be).
Check for the loose buckle
Verified Supplier - MOJO Technology Co.,Ltd
Bussiness Type: Manufacturer 
- Product Listing Policy - Intellectual Property Policy and Infringement Claims
- Related Links
- Privacy Policy
- Terms of Use
ICP License: 浙ICP备2023052164号 © Coowor.com. All rights reserved.
Tel: +86 10 65447649 E-mail: coowor@coowor.com
Copyright © Hangzhou Coowor Network Technology Co., Ltd. All Rights Reserved.
