The Best Electric-Heating Sugar Cooker / Jacket Kettle

The Best Electric-Heating Sugar Cooker / Jacket Kettle

1. PRODUCT DESCRIPTION

Structure:It is consist of pot body, agitator, heating jacket, holder and seal device. The material of the body, agitator, seal and electric heating device is all made of stainless steel USU 304. The seal device is in the top of the lid welded on the bracket and installed with speed reducer and motor. The agitator is driven by drive shaft. The heating jacket is provided with an inlet, oil extraction, emptying valve, electric rods etc. over the hole.

Heating Mode: Conduction oil imported to the interlayer is heated through electrical heating tube as a medium. There are three groups of heating control switches supplied with 380V power adjusted from 0 to 300 degrees arbitrary.As long as the temperature reaches the desired value, it cools down very slowly and takes fifteen to twenty minutes to heat as usual.

2. APPLICABLE SCOPE

Applicable Scope: The effect is very good whether it is used for boiling sugar and frying hot pot bottom material or frying paste filling. As frying equipment, it can be used to fry peanut, crab bean and seeds. Furthermore, a lot of manufactures use it to produce sticky candy, sorghum candies, walnut cake and all kinds of starch soft sweets.

3. EVALUATION

Advantages: a. The equipment can achieve heating without pressure. And the temperature can reach over 260 degrees.

                      b. It is easy to find the heating source as long as there is electricity.

Disadvantages: Slow heating speed, high power consumption

4.FEATURES

1. As per the structure:Tilting-type, Vertical type (Stationary type)

2. As per the heating: Electric heating type, Steam heating type, Gas heating type

3. As per the recipe: With Stirring, Without Stirring

4. As per the sealing method: NO cover type, Flat cover type, Vacuum type

5. Body material: The outer and inner pot is all stainless steel.

6. Pot body with stirring parts: Stirring device is at top center. The reducer output shaft uses looper to connect with propeller shaft so as to take down and clean easily.

7. Stirring speed: 36 round per minute

8. The speed can be designed according to customer requirements.

9. The type of propeller: ordinary type and scraping the bottom type

10. Other accessories: pressure gage, safety valve, pointer thermometer, steam inlet, outlet etc

11. Tilting-type pot body can turn to at most 90 degrees with manual flip.

Note: the working pressure of the jacket, the power of the motor, the power of the heating, the structure of the propeller can be customized according to the special requirements of customers.

5.TECHNICAL PARAMETERS

6. PRODUCT PICTURES

7. FAQ

Q: Are you manufacturer or trading company?

A: We are a professional manufacturer.

Q: Where is your factory located?

A: Our factory is located in Zhucheng, Shandong, China. From Qingdao where closes to us 1.5 hours to Beijing, 1.75 hours to Shanghai, 4.5 hours to Guangzhou by air.

Q: What is your business scope?

A: There are three categories, such as kettle, rubber vulcanization and food sterilization pot.

Q: How could we confirm the details of the products?

A: We will provide all the drawings for you to confirm or you can come here to conduct investigation.

Q: Will you charge us for drafting if we have special requests?

A: No, we will not. Free of charge to make a draft or offer.

Q: How long the warranty will be?

A: 1 Year warranty.

Q: How about the installation? And what if the machine goes down?

A: We will do that. There are two options.

a. We could appoint our engineer to your company to debug and repair, as for the cost of this trip such as ticket, visa, accommodation and labor cost shall be on your side.

b. On-line service will be provided. If still is under guarantee period, the necessary accessories and parts will be provided free, but the transportation cost of it shall be on your side.

Q: Do you take L/C?

A: Yes, we accept L/C, T/T and irrevocable L/C payable.

Q: Can we become your distributor in our country?

A: Yes, welcome you! More details will be discussed if you are interested in being our agent.

8. PACKING & DELIVERY

 1. Inner: stretch film

2. Outside: wood case

We will deliver your goods by LCL/20'FCL/40'FCL depending on your order.

Before delivery, our professional technician will do trial run for each product to make sure no problem, you can come to our factory and test our machine together with us.

9.CERTIFICATES

10.COMPANY INFORMATION