Brand Name: Shield
Model Number: JTT
Place of Origin: Zhejiang, China (Mainland)
JTT adjustable anti-vibration mount
Applications: JTT anti-shear adjustable spring vibration absorber widely used in variuos fan, fan unit, unit case, power unit, cooling tower, air-conditioner unit, water pump, and especially for the power equipment whose rotatation speed is low(350rpm and above) as well as the nagtive isolation for the test-bed and precious instrument etc……
General introduction:
Throught many years research, we have combined the JTT series adjustable spring vibration absorber with the advantages of the similar products both abroad and dometically. The spring in this absorber adopts multi-curves cylinder shaped spring whose shrinkage ratio is far more larger than most of rubber materials, and this item can meet the demand of the low hunting frequency.
Adjustable device is installed on the absorber. Therefore when the compress distortions are not identical due to the disaccord of the equipment barycenter, the equipment can be kept to be horizontal in the main, be adjusting the adjustable device. While the lower nut should be screwed down with the upper crust in order to increase the screw intensity. If the plane needn'd to be adjusted, the isolated equipment is able to be put on the absorber by riveting with the height adjusting screw. And the base can be riveted with the groundsill.
The JTT series also can control the lateral movement to make the horizontal tension isolated. Thus the horizontal pull would be stronger than the vertical one.
The JTT series develop the horizontal rigidity and the stability of the isolated equipment especially for the high barycenter and strong transverse strength isolated equipment. Therefore the product could be linked with isolated equipment for transportation to avoid to damage to both the absorber and the equipment.
Some performance data:
Model No: JTT-10~JTT-8500
Best rated load(kg):10~8500
Load range(kg): 0~150…4500~9500 Best
distortion(mm): 15