Brand Name: Peide Water Filter Manufacturer
Model Number: XLQ Water Filter Manufacturer
Place of Origin: Jiangsu, China (Mainland)
Automatic Self Cleaning Filter of Water Filter Treatment Manufacturer
How Works
The unit consists of two stages of filtration, a coarse pre-filter and a stainless steel fine screen. The unwanted solids accumulate on the inner surface of the fine screen, building up a filter cake, which filters out even finer particles, creating a pressure differential. Once the pressure drop reaches a preset level, a rinse cycle is activated by the factory supplied control system. The solids are removed from the fine screen using a spot backwashing method, which aggressively sucks the dirt off the screen, similar to a vacuum cleaner, and are carried to the drain via the rinse valve. The dirt collector rotates, ensuring the entire screen is cleaned each cycle. The process takes a matter of seconds, without interruption of system flow.
Self cleaning filter Control method
Filter has differential switch and integrator. Once the pressure drop reaches a preset level, a rinse cycle is activated by the PLC controller.
Self cleaning filter Feature
structure compact low water consumption fine filter degree low pressure drop
Self cleaning filter Application
1.Chilling water treating: such like cooling tower, water supplement system, air conditioning system, heat exchange system.
2.Raw water treating: such like surface water, lake, sea water, tank water, well to remove grind, sand, algae, organism etc.
3.Cycling industry water: cooling tower, polishing process water, ion exchange water, spraying process water, heat exchange plant, rolling plant, casting plant etc.
4.Irrigation: farm, dip field, golf, lawn etc.
5.Recycle water
Filter degree
Mic um |
100 |
120 |
150 |
200 |
400 |
800 |
1500 |
3000 |
Mesh |
150 |
120 |
100 |
80 |
40 |
20 |
10 |
5 |
Self cleaning filter Horizontal type
Model | In and out diameter(mm) | Flow rate(T/H) | Filter area(cm2) | Drain(mm) | Water consumption(L) | Motor(Kw) | Weight(KG) |
XLQ-50XM | 50 | 20 | 1500 | 50 | 75 | 0.55 | 85 |
XLQ-80XM | 80 | 50 | 1500 | 50 | 75 | 0.55 | 87 |
XLQ-100XM | 100 | 80 | 3000 | 50 | 150 | 0.55 | 210 |
XLQ-125XM | 125 | 100 | 3000 | 50 | 150 | 0.55 | 212 |
XLQ-150XM | 150 | 150 | 7000 | 50 | 150 | 0.55 | 220 |
XLQ-200XM | 200 | 300 | 7000 | 50 | 150 | 0.55 | 220 |
XLQ-250XM | 250 | 450 | 11000 | 80 | 400 | 0.55 | 395 |
XLQ-300XM | 300 | 600 | 11000 | 80 | 400 | 0.55 | 405 |
XLQ-350XM | 350 | 900 | 13500 | 80 | 400 | 0.55 | 625 |
Install way | Horizontal |
Unit capacity | 15-900T/H,Achieve parallel install to achieve big capacity |
Min work pressure | 0.25Mpa |
Max work pressure | 1.0Mpa,1.6Mpa |
Filter precision
|
100-3000um |
Control way | Differential pressure, time and manual |
Max temperature | 65℃ (reach to 100℃ if required) |
Back wash time | 50-90S |
Rotating speed | 14-20rpm |
Clean way | Scanning type |
Differential pressure in cleaning | 0.01-0.08Mpa |
Back wash water consumption | Approximate 280-310L |
Voltage | AC220V 380V,50Hz,3PH,CONTROLLER: 220V |
Motor power | 0.37Kw |
Material | Carbon steel with anti-corrosion painting |
Screen | Multi stainless steel mesh + pvc structure |
Drain valve | cast iron with anti-corrosion painting |
PLC controller |
Pressure drop VS flow rate
Self cleaning filter Verticaltype
Model | In and out diameter(mm) | flow rate(T/H) | Filter area(cm2) |
Drain(mm) | Water consumption (L) |
motor(KW) | weight(KG) |
XLQ-200XT | 200 | 300 | 7500 | 50 | 250 | 0.55 | 340 |
XLQ-250XT | 250 | 450 | 11000 | 80 | 400 | 0.55 | 350 |
XLQ-300XT | 300 | 650 | 11000 | 80 | 400 | 0.55 | 365 |
XLQ-350XT | 350 | 900 | 13800 | 80 | 400 | 0.55 | 630 |
XLQ-400XT | 400 | 1200 | 13800 | 80 | 400 | 0.55 | 650 |
XLQ-350XT | 350 | 1500 | 13800 | 80 | 400 | 0.55 | 690 |
Install way | Vertical installation |
Unit capacity | 15-900T/H, Achieve parallel install to achieve big capacity |
Min work pressure | 0.25Mpa |
Max work pressure | 1.0Mpa,1.6Mpa |
Filter precision
|
100-3000um |
Control way | Differential pressure, time and manual |
Max temperature | 65℃ (reach to 100℃ if required) |
Back wash time | 60-120S |
Rotating speed | 14-20rpm |
Clean way | Scanning type |
Differential pressure in cleaning | 0.01-0.08Mpa |
Back wash water consumption | Approximate 500L |
Voltage | AC220V 380V,50Hz,3PH,Controller: 220V |
Motor power | 0.37Kw |
Material | Carbon steel with anti-corrosion painting |
Screen | 316SS (Woven, ,multi-layer sintered, wedge) |
Drain valve | cast iron with anti-corrosion painting |
PLC controller |
Pressure drop VS flow rate
Self cleaning filter Install notice