Water softener fleck

Softener waste water treatment equipment

Type choice:

1. Users can choose manual operation control system for saving cost.

2. If users using for 24 hours can accord to water using time choosing for rebirth

3. Uses can according to water quality requirement:first grade multi-media filter,which can remove mud,rust,colloid and suspension in water.Second grade activated carbon filter,which can remove color,olfactory,biochemistry organic in water and encrease the left oxygen value and pollution in water.Third grade equiped softener equipment.

4. Effluent water capacity achieves the water supply of national low-pressure bioler.

5. Time control- type;flow control- type.In working ,apply single-tank,double-tank and multi-tank etc. other varied combination method.When choosing,users can choose as their needs.In operation,it has not only automatic function,but also is manual operat

 Technicial parameters:

Water pressure:0.18-0.6Mpa 

Working temperature:1°c-55°c

Hardness of raw water: <8mmol/L 

Operation method:manual/automatic

Hardness of effluent water:≤0.03mmol/L 

Rebirth method:

Control method:time or flow

Working electric: 220V/50Hz

FAQ

What is a softener?

Softening by ion exchange resin is the most common and probably the easiest method of removing  Hardness ( that is  calcium and magnesium) from water and render the water suitable for utility Purpose . As the name implies ion exchange  is a process in which undesirable ions are exchanged For more desirable ions.

What problems are caused by hard water?

Hard water does not lather easily with soap. This causes problems during washing and bathing and Prevents proper  cleaning. Hard water can also cause scaling in pipes, fittings and storage tanks. Scaling in geysers can increase the  electricity consumption bills. Hard water is also bad for the skin and hair.

How does the softening process work? 

The softening process consists of passing raw water containing hardness through a bed of cation resin In sodium form.  The hardness ions Ca & Mg are taken up by resin and in exchange, the sodium ions  Are relinquished from the resin.  This is called the service cycle.

What is Regeneration of the Softener ?

 Raw water will continue to get softened till the resin gets exhausted. Bringing back the resin to it Original form is called  regeneration. Softener resin is regenerated by sodium chloride of 10- 15 % Concentration. Depending on the softener  design, the regeneration may need to be done every day or Every few days or every week and month.

Guidelines for getting a proper quotation

1)Tell us the raw water/source of water(tap water, underground water, well water, borehole etd...)

2)Provide water analysis report

3)Required production capacity( 500 liters per hour, 1000liters per hour…)

4)What’s the pure water used for( drinking, bottle water or industrial use…)

Contact us , you will get more than what you see!