diesel engine water pump for irrigation

Application

This diesel engine water pump for irrigation is applied in pumping fresh water, river water, sea water, corrosive water, impurity water, dirty water, etc. Such as

     1. Irrigation

     2. Fire fighting

     3. Industry water

     4. Mine water pump

     5. Transport water with salt or any other impurity things

6. Marine

Etc…

Working Conditions

Rotating speed: 3600r/min, 1800r/min, 2960r/min, 1500r/min

Medium: clean water or other liquids similar to clean water in physical and chemical properties

Medium temperature: -10 ~ 80°C,400°C available under special design

Ambient temperature: Up to 40°C

Range of capacity:1.8~1000m3/h

Range of head: up to130m

Pump Construction

Casing/impeller:cast iron,stainless steel,copper,bronze,

Shaft: carbon steel 45#,stainless steel

Mechnical seal:graphite/silicon carbide/tungsten carbide 

Advantages

1.Directly coupled, vibration proof and low noise.

2.Same diameter of inlet and outlet .

3.C&U bearing ,which is the most famous brand in China.

4.Circulating flow cooling ensure mechnical seal long life .

5.Small foundation required that will saving construction investment by 40-60%.

6.Excellent seal that is no leakage

More information access https://www.borravip2.com/
Mail ID：Lisa@borrapump.com

Tel: +86 57767193977.