Brand Name: anlt
Model Number: ALTFV2R-Heating Mat
Place of Origin: China (Mainland)
![]() |
Electric Underfloor Heating MatElectric Heated Floor MatElectric Warm Floor MatInfrared Heating MatRadiant Heating MatHome Heating MatFloor Heating MatFloor Heat Mats |
Benefits
There are various types of heating including natural or propane gas and oil, but electric heat, though not always the most efficient
cost-wise (depending on your electricity rates), is probably the most common - mainly because it is readily available in most areas.
Compared to other heating systems, the investment costs for electric underfloor heating are extremely low.
No need for maintenance contracts once the system is installed.
Convenience -- Easy to fix by adhering to the floor and design to install at the site.
All-in-one -- Complete All-in-one with the mat (fiber-glass mesh) and cable to facilitate convenience in the plastering finish.
Flexibility -- possible to install flexibly in any shape at any place.
Easy Installation -- When the mat is unfolded, the cable is attached at certain& intervals and it can be automatically installed.
Separate control for each area. Each area or room can be activated separately.
Technical data |
|
Power lead wire |
2M soft copper with ground |
Heating element |
Copper Alloy |
Number of conductor |
Single or Double conductor |
Conductor insulation |
Teflon |
Shieded layer |
Copper and Aluminum foil stranded longitudinally |
Outer jacket material |
PVC applicable from -25 ℃ to 105℃ |
Cable diameter |
3.5 to 4.0 mm |
Voltage | 110V/120V, 220V/230V/240V |
Linear Power Rating |
12W per linear meter |
Output Power |
100w or 150w or 160w per square meter |
Installation Guidance
Application Fields
ANLT electric underfloor heating system provides a warm, comfortable and luxurious home environment. For use in every room such as the bathroom, kitchen, living room, utility room, basement, den, or bedroom. And for use in commercial buildings and spaces such as offices, storehouse, markets, classrooms, kindergarten, hotels, hospitals, and in live-stocks and greenhouses, etc.
ANLT07H - Programmable Touch Screen Thermostat
Power Supply: 85-250VAC
Display resolution: 0.1℃
Setting Unit: 0.5℃/step
Internal sensor measurement range: 0 - 40℃.
Setting range: 5 - 35℃ (default: 25℃)
Inside sensor: NTC B=3380 10k
@25degrees Celsius
Max. switch power: 3A/16A/30A
External sensor measurement range: 0 - 99℃.
Setting range: 5 - 95℃ (default: 50℃)
Extra sensor: NTC B=3380 10k @25 degrees Celsius, length=3 meters
Display type: LCD
Display area: 60 x 45 mm
ANLTE52 - Programmable Digital LCD Display Thermostat
Applicable for hot water radiant and electric heating system.
Voltage: 220±10%VAC, 50/60Hz
Room setting Range: 1℃~50℃ (can adjust to 15℃~90℃)
External limitation: 20℃~90℃ (factory setting 65℃)
Sensor type: NTC
Color: white ivory
Mounting: mounts directly onto wall or wall-box
Relative humidity: <85% (23℃)
Size of display: 58 mm X 35mm (H/W)
ANLT8600 - Programmable Floor Heating Room Thermostat
Power Supply: 100-240VAC 50/60Hz
Power consumption: <1.5w
Setting Time + Black light + Large LCD screen Accuracy: ±1℃
Timing error: <1%
Temperature re-range: 5 - 35℃
Rubber-thermoplastic NTC Sensor Housing material:self-extinguishing PC
ANLT71.36 - Knob / Manual Thermostat
Voltage: 220AVC+/-15% 50/60Hz
Power consumption: 3.5A
Re-range:5-30 Celsius
Maximum load:16A 3000W
Double control, LED indication working
Setting range: 10 ~55℃
Ambient temperature: -5~55℃
Protective housing: IP20
ANLTC70 - Temperature Controller
Power supply: 230 V 50 Hz
Power consumption: 5 W
Adjusting range: 5°C ~ 40°C
Differential per. temp. : 0.5°C
Operating temp.: - 5°C ~ 50°C
Degree of protection: IP20
Material: self-extinguishing PC Floor sensor: NTC sensor 3 m