silicone drum heater with thermostat

                                      silicone drum heater with thermostat 

Product overview

Make the liquid inside the barrel by heat,concetion easy to remove and make the bucket in the adhesive,grease,paraffin,asphalt,paint,oil and  other raw meterials for resin, through the heating barrel, the viscosity decreased even reduce the power og the pump.This  device is not affceted season ,can be used all year round. If need to shrten the heating time, can be used in a bucket and three heater .

Feature 

Install the heater surface sensor, through the temperature regulating control temperature rirectly.

Use 

The heater is used for thanks,piping , valves and othe equipment in heating, heat insulation. Can be directly winding in the heated surface for parts, easy insulation and removel. Espesially suitable for the dissolution of paraffin oil object of wox to prevent winter,etc.

Installation:

1, First of all please clean the surface of drums. Secondly wind the heater around the drum tightly 

and fix it with springs. 

2, In order to reduce the heat loss, it is available to use thermal insulation layer outside the heater.

3, Do not wind the heater superposed. It is possible to be over-heating.

4, The surface of heater should stick to the surface of drum tightly in order to avoid air heating.

Notes:

1, To heaters without usage for a long time, please inspect if there is damage before plugging in.

2, Do not scratch the insulation material when operating. If insulation material is damaged, 

please stop using the heater for safety.

3, After usage, please unplug the power cable to avoid air heating. 

4, The heater is not highly moistureproof. Please don not use it in water or frost for long time.

5, The heating speed is different according to different environment, materials and form