sus304 magnetic water flow sensor

parameter of the pressure transducer

 Approval                                                CE  Rohs

 The  pressure transducer  installed on the water pipe through series connection or parallel connection,It is used hydraulic pressure (air pressure) to drive magnetic induction and convey switch signals.

   The water flow switch send on or off signal according to the liquid flow volume, it is an important component of the fluid flow controls system.If  the  flow in the pipe is lager than start-up volume, the magnetic valve will be moved by  the force of  flow pressure, and then it  will trigger the reed switch that same sealed in the vavle and send the signal . When the flow volume reduce lower than the start-up volume,magnetic valve core will be forced back to theoriginal place by the reset spring in the vavle.

Flow switches Application 

Gas and liquid  dual-use, it can be widely used in industrial automation, machinery and equipment, industrial compressed air, refrigeration HVAC fields. Flow switch magnet is not flowing waterways, normally used for sewage system pipe.

Adaptation
1. Away from magnetic objects or environment.
2.Output  signal is switching, the control object connections must also switch controlling relationship.
3 .the control object signal power shall not exceed the load capacity.
4. The aqueous medium control device is a device available for other medium control. A variety of size

Certification CE and Rohs

During the exhibitons