Evaporative Condensing Closed Type Cooling Tower Enclosure Cooling Unit For Fresh Keeping

Evaporative condenser series

      The power: due to the condensation temperature of the evaporative cooling is determined by wet ball temperature, in general, the wet bulb temperature of dry bulb temperature (environment) low 6-8 degrees Celsius, the evaporative cooling in the structure of the unique design

Make full use of this condition, so that the condensing temperature and pressure of the cooling system is reduced, the cooling capacity of the compressor is improved, and the power consumption is reduced. The evaporative cooling water pump is equipped with a water pump

     The power of the pump motor is about 1/3~1/4. According to the introduction and practice of the application, as long as the configuration is reasonable, proper selection, with the evaporative cooling ratio of other forms of water cooling condenser energy consumption decreased by about 15%.

    The water saving: evaporative cooling is mainly condensation heat by evaporation of water to take away the refrigerant, 1L water evaporation can take the heat of the 670W, and other forms of water cooled condenser is the use of water heating heat absorption and heat, every 1L water only take 4-5W calories, so take as much heat, cooling water with water-cooled condenser other forms of the much larger, so it needs a large circulating water and cooling tower, circulating water pipes, so the tank leakage leakage loss and a large number of evaporation cooling tower were caused by water flowing pipe valve. The evaporative cooling requires less water circulation, and the evaporative cooling by water eliminator with dehydration, the evaporation of water flowing loss is small, only about 10% of the other water-cooled condenser, greatly saving water resources.

     It covers an area of small, convenient installation, short construction period

Evaporative cooling condenser, cooling tower, water tank, water pump in one, can be placed on the roof, the installation of piping is simple, no other water system accessories, less installation materials, shorten the construction cycle, reduce installation costs.

The maintenance cost savings

    The evaporative cooling system of low pressure exhaust condensing temperature, exhaust gas temperature and the temperature of lubrication oil, the operation condition of the compressor is improved, the machine in good condition, life can be improved, extended

    Compressor failure cycle, increase system reliability, reduce maintenance costs.

Ammonia and freon refrigerant

     The coil is made of elliptical tube, which is beneficial to the flow of liquid refrigerant in the tube and the formation of water film on the outside surface. The coil pipe is provided with a heat exchanger layer of a PVC trap

And at the same time into the fresh air, the formation of double effect cooling effect, cooling water from the coil down to the sink in the process of being PVC trap heat exchanger layer further cooling and cooling, further enhance the heat transfer effect.

    With the same flow structure, the flow rate of cooling water can be accelerated, and the scale of cooling pipe can be effectively delayed.

Reasonable shape design, all evaporative cooling can meet the container transport conditions, simple and convenient.

   Shandong Honor Refrigeration Technology, founded in 2005, is specialized in cold room business in domestic market and enjoys good reputation in the refrigeration industry. Since 2009, we started to seek overseas opportunities, with our expertise and experience in the industry, and utmostly the good quality, reasonable price and excellent service, we have gained cold room projects in many countries including Cambodia, Vietnam, Brazil and so on. 

 please visit our website for more information: www.aonaerzl.com

Zhttps://aonaer.en.alibaba.com/?spm=a2700.8239084.0.0.UyFul

Our advantages:  

1. Rich overseas project experience: we have projects in the US, Brazile, Vietnam, Ethiopia, Thailand and Cambodia;  

2. Quality Assurance: Practical design, Skilled technicians and production workers, integral cold room production line, Strict QA & QC system;
3. Custom-made Design: we design and make drawing based on customer requirements;
4. Technique Support: For Walk in cold room, we provide the diagrammatic drawing which helps for installation. Cold storage warehouse: We have nearly 20 technical engineers who can go aboard to do commissioning and installation;

5. International Trade Operation: We have concentrated on international trade of cold storage room line for more than 10 years, accumulated various experience from different customers of different countries.

Competitive price: as a manufacturer, our product is of high quality and reasonable price;

 Our Service:

a.We can do program design for you according to your requirements.b.The best performance and short lead time.
c.Technical support: nearly 20 technical engineers ready to help you; 
d.12 months warranty time. 

Our  great team