Brand Name: CRYOTEK
Model Number: CIS502D04
Place of Origin: Jiangsu, China (Mainland)
Fin Spacing 4mm CIS Industrial Unit Cooler Medium/Low Temp.
Product Features
1. High efficiency staggered fin pattern design;
2. Optimized Sine waved fin for high performance;
3. Internal grooved tube for higher heat exchanger efficiency;
4. Optimized circuiting for better evaporation;
5. Optimized air flow to reach max. Capacity;
6. Robust, state-of-the-art sheet metal design;
7. Casing with white coating for corrosion protection;
8. Dual drip tray design to avoid water condensation;
9. Fin spacing optional for specific application;
10. Dual fin spacing design is available for min. frost;
11. Tailor made unit cooler is available for special application;
12. Specific fan motor for low temp. Application, higher air flow, higher air throw;
13. Optional defrost available (Electric, water & hot gas defrost);
14. Imported brand e-heaters applied for defrost;
15. Distributor support design to avoid unexpected vibration;
16. Special "Floating Tube" design for large unit cooler;
17. SS or AI casing is available for certain models;
18. Air jet for longer air throw is available for certain models;
19. Available for CO2-DX unit cooler up to 40 Bar;
20. Provide customized brine air cooler.
*Capacity is based upon standard EN328 as follows:
Operating mode |
SC1 |
SC2 |
SC3 |
SC4 |
SC5 |
Evap. temperature |
0 ºC |
-8ºC |
-25ºC |
-31ºC |
-40ºC |
TD(Ta-Te) |
10K |
8K |
7K |
6K |
6K |
AIR inlet temp. |
10ºC |
0ºC |
-18ºC |
-25ºC |
-34ºC |
Superheat |
6.5K |
5.2K |
4.6K |
3.9K |
3.9K |
RH |
85% |
85% |
95% |
95% |
95% |
*The performance data have deviation when different fan models applied and exact data shown on the data plate.
*Air throw is for reference purpose only. The actual air throw will be affected by the arrangement of the air unit coolers or the placement of the goods.