Brand Name: tpms
Model Number: truck tpms
Place of Origin: Zhejiang, China (Mainland)
storage temperature: -30°C—85 °C
Working frequency: 434.015MHZ
Receive sensitivity: -104dBm
Working voltage : 2.0-3.0V/12V±0.5
Working current: 30mA
Working temperature: -20°C—80°C
Working humidity: MAX95%
Working frequency: 434.020MHz/431.505MHz
Receive sensitivity: -110dBm
Transmitting power: 10dBm
Working voltage : 24±2V
Working current: 30mA
storage temperature: -30°C—85 °C
Working temperature: -40°C—+85°C
Level of protection: IP67
storage temperature: 0°C—40°C
Working frequency: 433.92MHZ
Working temperature: -40°C—125°C
Working humidity: MAX95%
tire pressure monitoring range: 0—5.0Bar (relative pressure)
Pressure reading error value: ±0.1 Bar
Tire temperature monitoring range: -40°C—125°C
Temperature reading error value: ±3°C
Transmitting power: <10mW
step |
operation |
diagram |
1 |
Using a jack to lift the car body |
|
2 |
Take off the wheel weighter on the hub |
|
3 |
Take off the tire from the hub |
|
4 |
if the bottom of the valve stem is made of rubber, please cut away the rubber bottom of the rubber tire valve stem |
|
5 |
Take out the valve stem, and clean residue carefully |
|
6 |
Install the sensors into corresponding tire correctly according to label on each sensor |
|
7 |
Using a wrench to fasten valve stem and then lock nut. |
|
8 |
Assemble tire and wheel, avoiding to damage the sensor and valve stem while operating. |
|
9 |
Inflate the tire |
|
10 |
Correcting and drilling balancing. |
|
11 |
Install the tire into it’s home position |
|
12 |
Repeat the above procedure to finish other sensors’ installation |
|
Suggest you to test our product when you finish installation to ensure our tpms working well. Namely, start your car and drive for a short distance to check whether the receiver can receive each tire’s data normally. Please be sure to install our products according to above procedure, any questions please call our customer service department |