CNC shaft 1-4mm quenching machine induction hardening equipment

Quenching/hardening /heat treating

Surface heat treamtne is by heating the surface of the steel, cooling and changing the surface mechanical properties of meta heat treatment process. Surface hardening is the main content of the surface heat treatment.Its objective is to obtain a high hardness of the surface layer and favorable stress distribution, in order to improve the wear resistance and fatigue properties of the workpiece.
It is metal heat treatment process,to enhance work piece surface. It does not change the organization and performance of the work piece heart section.. It is widely used in work pices , both surface requires a high wear resistance, fatigue strength and a larger impact load, but also requires a whole has good ductility and toughness, such as crankshafts, camshafts, transmission gears.

High frequency induction hardening equipment, my company professionally manufacturer WGH,WZP Series induction heating machine.

Technical parameters of WZP-120 quenching induction hardening equipment

Features of WGH High frequency induction hardening equipment :

1.High efficient: energy saving,environmental protection
2.Heating fast:The fastest heating speed is less than 1 second
3.Heating wide: can heating variety of metal workpieces(according to different shapes of work pieces, replace removable induction coils) 
4.Easy installation :the machine can be used,as soon as connected the power supply, induction coils, water inlet and outlet.
Small size, light weight ,easy to use
5. Simple operation , several minutes to learn.
6. Start fast, pass water and electric power can start heating
7.Low power consumption:can save about 40% energy than tradional HF tube furnace , save degree is relation with shpes of work pieces and induction coils.
8.Good effect: Heating very uniform (by adjusting the density of induction coils, makes every parts of work piece obtain the respective needs of temperature), warming up fast, less oxidation layer, surface got good gloss after heating .
9.Full protection: has over voltage,over current,temperature is over high,lack of water, lack of phase,etc, alarm lamps indicators. can automaticly control and protection the machine itself. 
10.Temperature is adjustable, by setting heating time and the infrared thermometer, to control heating temperature of work pieces.Thus control heating temperature to a technology points , Can also increase the insulation function.
11.High security, eliminating the nearly million-Volt high voltage

Hardening gears, shafts 

ISO and CE certification

Packing for yongda induction heating machine

1.Two wooden cases (plywood) for sea transport. 

Inside,will be filled with plastic foam,for waterproof and shockproof.

2.One for generator ,one for transformer 

3.Accessories: induction coils,foot switch and installing and operating instructions

1. Reply your inquiry within 24 working hours
2. Experienced engineer instruct and sales communicate with you in fluent English.
3. According to work pieces specifications, heating requirements, propose best solutions,also reference your ideas.
4. Machine details and working video link for your reference
5. Competitive price ,compare with the same industry
6. Production: strict quality standard, to produce machine and induction coils.
7. Debugging machine and only good machine will be sent.
8. Tracking goods shipping and provide bill of lading,invoice,packing list and other documents what you need
9. Provide install and technology instruction by sending drawings, email, or telephone,video.
10.If you need, will arrange one engineer to your place,instruct install machine and training operators.
11.Excess warranty period(12 months warranty), you can buy the spare parts from us with special discount price.
12.Provide long-terms technical support.

 If you are interest in quenching induction hardening equipment, welcome to contact us.

The following is jessie contact info.

Chian manufacturer of induction heating machine,since 1996.Welcome to contat us !